Pro Digital ODO/T probe and cable 1m.
The Pro DIGITAL ODO/T probe and cable assembly features integral optical dissolved oxygen and temperature sensors. Cable lengths are available up to 100 meters.
The ODO/T probe assembly pairs with the ProSolo Handheld to form a complete sampling system.
Featuring integral, digital sensors, the ODO/T is plug-and-play which minimises time spent on instrument setup. Pro DIGITAL technology allows the handheld to automatically recognise connected sensors, so there is no need to tell the instrument what is connected.
Optical Dissolved Oxygen (ODO) technology is non-consumptive, meaning oxygen is not consumed during the measurement. Flow dependence is non-existent and no stirring is required, resulting in the most accurate DO measurements available from a probe. The ODO sensor is not susceptible to interferences from other gases, drifts less and holds calibration longer than membrane covered sensors. Maintenance is a breeze with a simple, threaded optical cap that is good for at least two years.
The Pro DIGITAL ODO/T probe and cable assembly features include:
Measurement Method / Channels:
Parameters Measured: Dissolved Oxygen, Temperature
Size: Width - 2.46 cm (0.97 in.)
Unit of Measure:
Warranty: Warranty 2-year probe and cable assembly; 2-year extended warranty ODO sensor cap
Used with: ProSolo and ProDSS. Will not work with legacy ProODO handheld.