ALL

Stainless Steel
For filterS 32mmØ

Pack of 30 g

Pack of 500 g

For Detection of Oil in Water size 20 x 70mm Pack fo 100

HPLC SafetySet, V2.0 Extraction and Waste System, suitable for all HPLC systems

Safety Waste Cap, V2.0, GL45 3x PFA-fitting 2,3/3,2 mm OD, 1x PFA-Blind plug + connector for exhaust

SafetyCap I, V2.0, GL45 preperative, 1x PTFE-fitting 4,76 mm OD + air valve

SCAT Safety Caps for safe solvent supply, for NS 29/32 ground flask, 2 ports for 3.2mm OD Tubing

The integral air filter blocks hazardous vapours and cleans the inflowing air from dust and dirt particles. With various connectors for capillaries and tubes. Safety Caps are available for most common glass bottles (e.g. thread size GL45). They can be customized for other container sizes by using different adapters. Especially recommended for HPLC use: Solvents stay clean and components of solvent mixtures can not evaporate. Optimum protection against health hazards caused by evaporation and insufficient sealing.
Key advantages:
- no evaporation of hazardous gases
- no contamination of solvents
- no crimping of connection tubing
- easy container exchange
- no air intake (HPLC)
- cost efficiency (save expensive solvents by avoiding evaporation)

Safe solvent supply.
With integral air filter vent. For maximum efficiency, we recommend that the vent is changed every 6 months. The filter membrane absorbs dust and dirt particles to protect your solvent reservoirs. The vent is universally suitable for all Safety Caps: it also works with your current Safety Caps. Simply replace the old vent with the new one.

SCAT plug - for 23mm plug pack 10

(optional needed to plug ports not in use in cap)

With stopcock

For Merck bottles

SafetyCap II, V2.0 GL45, with shut-off (combined), 2x PFA-fitting 3,2 mm OD + air valve

Suitable for Laboratory Bottle Wide Neck