08452 30 40 30
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Calibration Bath
- Circulator - Bath
- Constant Climate Chamber
- Cooling
- Drying Ovens
- Environmental Simulation Chamber
- Fluid Connector
- Fridge Drawer
- Heating
- CO2-Incubator
- Cooling Incubator
- Heating Bath
- Heating Mantle
- Accessories for Standard heating mantles
- Analogue heating contollers CN-200
- Electronic heating mantles HM-200
- Electronic multi-size heating mantles HM-200-SP, spill-proof
- Electronic multi-size heating mantles HM-200-V, V-shaped
- Electronic stirrer mantles SHM-200 series
- Glass fibre-insulated heating cables series KM-HC-G
- Glass fibre-insulated heating tapes series KM-HT-BS30
- Heating mantles Electrothermal® MHM-200
- Heating tapes series KM-HT-201
- Heating Tapes Series KM-HT-202
- Heating tapes, fibre glass, KM-HT-G series
- Insulating mantles KM-IRB series
- Insulating mantles KM-IRU series
- Laboratory regulator KM-RX 1001
- Laboratory regulator KM-RX 1003
- Laboratory regulator KM-RX 1004
- Laboratory regulator KM-RX 1005
- Magnetic stirring bars Ikaflon®, bone, PTFE
- Metal-cased heating mantles KM-MEB series
- Metal-cased heating mantles series KM-M, without controller
- Metal-cased heating mantles series KM-ME, with controller
- Metal-cased heating mantles series KM-MHB
- Metal-cased heating mantles series KM-MNB
- Multi-size Heating Mantles, series KM-MPE for different sized round bottom flasks
- Power controller KM-L116 for heating mantles
- Power controller, Voltron 20
- Standard heating mantles series KM-G
- Standard heating mantles series KM-GF
- Standard heating mantles series KM-GH
- Stirring heating mantle LabHEAT® KM-MER-SO
- Stirring heating mantles LabHEAT® KM-MER series
- Support clamp KM-SK
- Temperature sensors for Laboratory regulator KM-RX1001, with diode plug
- Temperature sensors for Laboratory regulator series KM-RX
- Hotplate
- Incubator
- Microwave
- Oven, Furnace
- Shaking Incubator
- Shaking Water Bath
- Temperature Controller, Thermostat
- Test Incubator
- Thermoblocks
- Universal Heating And Drying Incubator
- Vacuum Drying Incubator
- Water Bath
- Heating Mantle
- Highly Dynamic Temperature Control
- Incubators
- Muffle Furnace
- Shaking Water Bath
- Software/Wireless Control/Automation
- Temperature Controller
- Temperature Regulator
- Temperature Test Chamber
- Thermal Fluid
- Water Bath
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical Instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- PPE
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
Temperature sensors for Laboratory regulator series KM-RX
LabHEAT®-sensors. Suitable for temperature control and KM-KM-RX1001 RX1004 with permanently attached cable, with or without diode plug.
KM-TP2: Pt100, up to 400 °C, sheated element V2A, dia. 4 x 50 mm,
KM-TPG: Pt100, up to 250 °C, glass tube, dia. 6 x 40 0mm,
KM-TNS: NiCr-Ni, up to 1200 °C, rod sensor in Inconell, dia. 1.5 x 300 mm
KM-TNF: NiCr-Ni, up to 400 °C, flat sensor, 0.4 x 15 x 400 mm
Temperature sensors for Laboratory regulator series KM-RX
PART NO.4AJ-9642672
81119||79717||82770||81387||79112||81891||81232||81026||81764||81337||79425||82243||82996||81649||81646||79404||79895||81657
Type||Suitable for vacuum||Length arm mm||With snap-on clips||Accuracy||Shape||Sort of probe||Type of probe||Opening Ø mm||Ø mm||Gap adjustment||Shock||Max. int. tubing Ø 2 mm||Tolerance||Temperature stability||IP code||For||PK
KM-TP2|| ||400|| || || || ||Pt 100||4||50||4 x 50 mm|| ||2|| ||Stainless steel|| ||KM-RX1004/1005||1
SAF Heat
62000120
Temperature sensors
0
3
4
1
Price: £43.20
Out of Stock
PART NO.4AJ-9642671
81119||79717||82770||81387||79112||81891||81232||81026||81764||81337||79425||82243||82996||81649||81646||79404||79895||81657
Type||Suitable for vacuum||Length arm mm||With snap-on clips||Accuracy||Shape||Sort of probe||Type of probe||Opening Ø mm||Ø mm||Gap adjustment||Shock||Max. int. tubing Ø 2 mm||Tolerance||Temperature stability||IP code||For||PK
KM-TNS|| ||1200|| || || || ||Thermocouple||1.5||300||1.5 x 300 mm|| ||2|| ||Stainless steel|| ||KM-RX1004/1005||1
SAF Heat
62000200
Temperature sensors
0
2
6
1
Price: £63.90
Out of Stock
PART NO.4AJ-9642670
81119||79717||82770||81387||79112||81891||81232||81026||81764||81337||79425||82243||82996||81649||81646||79404||79895||81657
Type||Suitable for vacuum||Length arm mm||With snap-on clips||Accuracy||Shape||Sort of probe||Type of probe||Opening Ø mm||Ø mm||Gap adjustment||Shock||Max. int. tubing Ø 2 mm||Tolerance||Temperature stability||IP code||For||PK
KM-TNF|| ||400|| || || || ||Thermocouple|| ||400|| || ||1.5|| ||Stainless steel|| ||KM-RX1004/1005||1
SAF Heat
62000250
Temperature sensors
0
1
7
1
Price: £72.90
Out of Stock
PART NO.4AJ-9642673
81119||79717||82770||81387||79112||81891||81232||81026||81764||81337||79425||82243||82996||81649||81646||79404||79895||81657
Type||Suitable for vacuum||Length arm mm||With snap-on clips||Accuracy||Shape||Sort of probe||Type of probe||Opening Ø mm||Ø mm||Gap adjustment||Shock||Max. int. tubing Ø 2 mm||Tolerance||Temperature stability||IP code||For||PK
KM-TPG|| ||250|| || || || ||Pt 100||6||400||6 x 400 mm|| ||1.5|| ||Glass|| ||KM-RX1004/1005||1
SAF Heat
62000150
Temperature sensors
0
1
5
1
Price: £117.90
Out of Stock