08452 30 40 30
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Calibration Bath
- Circulator - Bath
- Constant Climate Chamber
- Cooling
- Drying Ovens
- Environmental Simulation Chamber
- Fluid Connector
- Fridge Drawer
- Heating
- CO2-Incubator
- Cooling Incubator
- Heating Bath
- Heating Mantle
- Hotplate
- Incubator
- Microwave
- Oven, Furnace
- Accessoires for Muffle furnaces, M110-series
- Ashing furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC controller
- Ashing furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC controller
- Ashing furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing/Burn off furnaces LV 3/11 - LVT 15/11
- Chamber furnaces
- Charging rack for ashing furnaces
- Collecting Pans for Muffle and Ashing Furnaces
- Exhaust Systems for Muffle Furnaces
- Glass oven G-300 Kugelrohr
- High-temperature chamber furnaces with air circulation NA / NAT
- High-temperature chamber furnaces with SiC rod heating LHTC/LHTCT
- High-temperature Tube Furnaces RHTH/RHTV series
- Muffle furnaces series L, max. 1100 °C, with flap door
- Muffle furnaces series L, max. 1100 °C, with flap door, with thermoelement Z1
- Muffle furnaces series L, max. 1200 °C, with flap door
- Muffle furnaces series L, max. 1400 °C, with flap door
- Muffle furnaces series LE 1/11 - LE 24/11 up to 1100 °C, with controller R 8
- Muffle furnaces series LT, max. 1100 °C, with lift door
- Muffle furnaces series LT, max. 1100 °C, with lift door, with integrated process documentation
- Muffle furnaces series LT, max. 1100 °C, with lift door, with overtemperature limit control
- Muffle furnaces series LT, max. 1200 °C, with lift door
- Muffle furnaces series LT, max. 1400 °C, with lift door
- Muffle furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC controller
- Muffle furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC controller
- Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces Thermolyne™
- Ribbed plates for muffle and ashing furnaces, ceramic
- Tube Furnaces
- Tube furnaces RS, split-type, with Controller C550
- Tube furnaces RS, split-type, with Controller P580
- Tube Furnaces with Stand
- Vertical tripod for RS tube furnaces
- Shaking Incubator
- Shaking Water Bath
- Temperature Controller, Thermostat
- Test Incubator
- Thermoblocks
- Universal Heating And Drying Incubator
- Vacuum Drying Incubator
- Water Bath
- Heating Mantle
- Highly Dynamic Temperature Control
- Incubators
- Muffle Furnace
- Shaking Water Bath
- Software/Wireless Control/Automation
- Temperature Controller
- Temperature Regulator
- Temperature Test Chamber
- Thermal Fluid
- Water Bath
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical Instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- PPE
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
High-temperature chamber furnaces with SiC rod heating LHTC/LHTCT
These powerful laboratory muffle furnaces are available for temperatures up to 1600 °C. The durability of the SiC rods in periodic use, in combination with their high heating speed, make these furnaces the all-rounders in the laboratory.
- Working Temperature 1500 °C (for models LHTC ../16), increased wear and tear of heating elements must be expected in case of working at higher temperatures
- Insulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2
- Housing made of sheets of textured stainless steel
- Dual shell housing for low external temperatures and high stability
- Furnace room lined with durable fiber material, not classified
- Optional flap door (LHTC) which can be used as work platform or lift door (LHTCT) with hot surface facing away from the operator (HTCT 01/ only with lift door)
- Switching system with solid-state-relays, power tuned to the SiC rods
- Controller is the programmable C 550 with adjustable ramps and holding times
- Easy replacement of heating rods
- Adjustable air inlet opening, exhaust air opening in the roof
- 400 V 3/N/PE 50/60 Hz connector as standard
Option:
- Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
- Square saggar for charging of up to three layers
- Lid for top saggar
- Manual or automatic gas supply system
- Process control and documentation via VCD software package for monitoring, documentation and control
High-temperature chamber furnaces with SiC rod heating LHTC/LHTCT
PART NO.4AJ-9764588
81119||79101||82770||79550||82993||83021||82804||82959||82954||82885||81974||79719||79640||79556||79404||79925||81657
Type||Nominal capacity l||Length arm mm||Type of door||Int. width mm||Deepenings/ chambers Ø mm||Height int. mm||Ext. width mm||Min. measured value mbar||Ext. height mm||Weight kg||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
LHTCT 08/16/C550||8||1600||Lift door||170||290||170||490||625||540||58|| || ||400 V·3/N/PE, 50/60 Hz|| || ||1
Nabertherm
LC084H6ON8
Furnaces high temperature chamber
Muffle furnaces
Incinerators
0
4
2
1
Out of Stock
PART NO.4AJ-9764587
81119||79101||82770||79550||82993||83021||82804||82959||82954||82885||81974||79719||79640||79556||79404||79925||81657
Type||Nominal capacity l||Length arm mm||Type of door||Int. width mm||Deepenings/ chambers Ø mm||Height int. mm||Ext. width mm||Min. measured value mbar||Ext. height mm||Weight kg||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
LHTCT 03/16/C550||3||1600||Lift door||120||210||120||415||545||490||38|| || ||400 V·3/N/PE, 50/60 Hz|| || ||1
Nabertherm
LC034H6ON5
Furnaces high temperature chamber
Muffle furnaces
Incinerators
0
3
1
1
Out of Stock
PART NO.4AJ-9764586
81119||79101||82770||79550||82993||83021||82804||82959||82954||82885||81974||79719||79640||79556||79404||79925||81657
Type||Nominal capacity l||Length arm mm||Type of door||Int. width mm||Deepenings/ chambers Ø mm||Height int. mm||Ext. width mm||Min. measured value mbar||Ext. height mm||Weight kg||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
LHTCT 01/16/C550||1.5||1550||Lift door||110||120||120||340||300||460||20|| || ||220 ... 240 V·1/N/PE, 50/60 Hz|| || ||1
Nabertherm
LC014H6ON1
Furnaces high temperature chamber
Muffle furnaces
Incinerators
0
3
0
1
Out of Stock
PART NO.4AJ-6235199
81119||79101||82770||79550||82993||83021||82804||82959||82954||82885||81974||79719||79640||79556||79404||79925||81657
Type||Nominal capacity l||Length arm mm||Type of door||Int. width mm||Deepenings/ chambers Ø mm||Height int. mm||Ext. width mm||Min. measured value mbar||Ext. height mm||Weight kg||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
LHTC 03/16/C550||3||1600||Flap door||120||210||120||415||545||490||38|| || ||400 V·3/N/PE, 50/60 Hz|| || ||1
Nabertherm
LC034K6ON5
Furnaces high temperature chamber
Muffle furnaces
Incinerators
0
4
3
1
Out of Stock
PART NO.4AJ-9764592
81119||79101||82770||79550||82993||83021||82804||82959||82954||82885||81974||79719||79640||79556||79404||79925||81657
Type||Nominal capacity l||Length arm mm||Type of door||Int. width mm||Deepenings/ chambers Ø mm||Height int. mm||Ext. width mm||Min. measured value mbar||Ext. height mm||Weight kg||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
LHTC 08/16/C550||8||1600||Flap door||170||290||170||490||625||540||58|| || ||400 V·3/N/PE, 50/60 Hz|| || ||1
Nabertherm
LC084K6ON8
Furnaces high temperature chamber
Muffle furnaces
Incinerators
0
4
4
1
Out of Stock