08452 30 40 30
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Calibration Bath
- Circulator - Bath
- Constant Climate Chamber
- Cooling
- Drying Ovens
- Environmental Simulation Chamber
- Fluid Connector
- Fridge Drawer
- Heating
- CO2-Incubator
- Accessories for CO2 incubators Heracell™ VIOS
- Accessories for CO2 Incubators ICOmed
- Accessories for CO2 Incubators INCOmed
- Accessories for CO2 Incubators Vios™ iDx CR
- Accessories for Midi 40 CO2Incubator
- Base frames for CO2 incubators CB series
- Cell Culture Flasks TripleFlask™, non-treated, PS/HDPE, pyrogen-free
- Cell Locker™ chambers for CO2 inkubator Heracell™ VIOS™ 160i
- CO2 incubator ICO
- CO2 Incubator Midi 40 with small volume
- CO2 incubator, BBD 6220
- CO2 incubator, BBD 6220
- CO2 incubators CB
- CO2 incubators CB-O, with O2 control
- CO2 incubators CB-S
- CO2 incubators CBF-O, with humidity and O2 control
- CO2 incubators CBF, with humidity control
- CO2 Incubators CelCulture® with copper interior/air jacket and ULPA filter
- CO2 Incubators CelCulture® with high heat sterilization and ULPA filter
- CO2 Incubators CelCulture® with high heat sterilization, ULPA filter and O2 control
- CO2 Incubators CelCulture® with high heat sterilization, without ULPA filter
- CO2 Incubators CelCulture® with high heat sterilization, without ULPA filter, with O2 control
- CO2 Incubators CelCulture® with stainless steel interior/air jacket and ULPA filter
- CO2 Incubators CelCulture® with stainless steel interior/air jacket, without ULPA filter
- CO2 incubators Heracell™ VIOS 160i, dual chamber, IR-CO2 sensor
- CO2 incubators Heracell™ VIOS 160i, dual chamber, TC-CO2 sensor
- CO2 incubators Heracell™ VIOS 160i, single chamber, IR-CO2 sensor
- CO2 incubators Heracell™ VIOS 160i, single chamber, TC-CO2 sensor
- CO2 Incubators ICOmed
- CO2 Incubators Vios™ iDx CR, copper interior
- CO2 Incubators Vios™ iDx CR, stainless steel interior
- CO2 Incubators with Chambers Heracell™ 150i/240i
- Copper interior for CO2 incubator CB-S 170
- Options for CO2 incubator Heracell™ VIOS
- Shelves for CO2 incubators CB
- Shelves for CO2 incubators CB with divided inner door
- Stacking adapters for CO2 incubators CB series
- Stacking frames for CO2 incubators CB series
- Cooling Incubator
- Heating Bath
- Heating Mantle
- Hotplate
- Incubator
- Microwave
- Oven, Furnace
- Shaking Incubator
- Shaking Water Bath
- Temperature Controller, Thermostat
- Test Incubator
- Thermoblocks
- Universal Heating And Drying Incubator
- Vacuum Drying Incubator
- Water Bath
- CO2-Incubator
- Heating Mantle
- Highly Dynamic Temperature Control
- Incubators
- Muffle Furnace
- Shaking Water Bath
- Software/Wireless Control/Automation
- Temperature Controller
- Temperature Regulator
- Temperature Test Chamber
- Thermal Fluid
- Water Bath
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical Instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
CO2 Incubators CelCulture® with stainless steel interior/air jacket and ULPA filter
The CelCulture® CO2 incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.
- Fast and uniform temperature and CO2
- Capacitive humidity sensor
- IR CO2-sensor with automatic auto zero
- Quick recovery time for temperature, CO2 and humidity after door opening
- Stainless steel 1.4301 (AISI 304) or copper interior
- Easy to clean due to removable lids and inner door
- Serial RS485 communication port
- Low maintenance
- Stackable
Options on request:
Additional shelves, stacking kits, rollerbase, chart recorder
-ULPA filtration system with internal blower
- 90 °C moist heat decon system
CO2 Incubators CelCulture® with stainless steel interior/air jacket and ULPA filter
PART NO.4AJ-6287239
79556||79101||81681||79595||79384||81130||79303||79372||79082||79830||79362||78974||79674||81465||81772||79998||81597||81492||79370||81201||79162||79823||81339||79181||81974||81311||78960||79404||81657
Power supply||Nominal capacity l||Min. temperature °C||Max. temperature °C||Max. measuring frequency||Max. Viscosity||Min. CO2 %||Max. CO2 %||Max. ext. tubing Ø||Sensor||Min. relative humidity %||Max. relative humidity %||Pyrogen free||Width tip||Stackable||Filling capacity||Ext. width mm||Ext. depth mm||Ext. height mm||mV range accuracy||Int. width mm||Max. measured value mg/l||Height int. mm||Min. funnel Ø||Weight kg||Material stopcock||Min. filter Ø||IP code||PK
CCL-170B-8||170||+5||60||RT+5 ... 60 °C|| ||19.5||0 ... 19.5 %|| ||85||90||85 ... 90 %|| ||7|| ||660||725||900||660 x 725 x 900 mm||505||530||635||505 x 530 x 635 mm||120|| || || ||1
Ewald
2170002
Incubators CO2
CO2 incubators
0
8
1
1
Out of Stock
PART NO.4AJ-6287238
79556||79101||81681||79595||79384||81130||79303||79372||79082||79830||79362||78974||79674||81465||81772||79998||81597||81492||79370||81201||79162||79823||81339||79181||81974||81311||78960||79404||81657
Power supply||Nominal capacity l||Min. temperature °C||Max. temperature °C||Max. measuring frequency||Max. Viscosity||Min. CO2 %||Max. CO2 %||Max. ext. tubing Ø||Sensor||Min. relative humidity %||Max. relative humidity %||Pyrogen free||Width tip||Stackable||Filling capacity||Ext. width mm||Ext. depth mm||Ext. height mm||mV range accuracy||Int. width mm||Max. measured value mg/l||Height int. mm||Min. funnel Ø||Weight kg||Material stopcock||Min. filter Ø||IP code||PK
CCL-050B-8||50||+5||60||RT+5 ... 60 °C|| ||19.5||0 ... 19.5 %|| ||85||90||85 ... 90 %|| ||4|| ||500||500||655||500 x 500 x 655 mm||345||375||390||345 x 375 x 390 mm||70|| || || ||1
Ewald
2170034
Incubators CO2
CO2 incubators
0
7
0
1
Out of Stock
PART NO.4AJ-6287241
79556||79101||81681||79595||79384||81130||79303||79372||79082||79830||79362||78974||79674||81465||81772||79998||81597||81492||79370||81201||79162||79823||81339||79181||81974||81311||78960||79404||81657
Power supply||Nominal capacity l||Min. temperature °C||Max. temperature °C||Max. measuring frequency||Max. Viscosity||Min. CO2 %||Max. CO2 %||Max. ext. tubing Ø||Sensor||Min. relative humidity %||Max. relative humidity %||Pyrogen free||Width tip||Stackable||Filling capacity||Ext. width mm||Ext. depth mm||Ext. height mm||mV range accuracy||Int. width mm||Max. measured value mg/l||Height int. mm||Min. funnel Ø||Weight kg||Material stopcock||Min. filter Ø||IP code||PK
CCL-240B-8||240||+5||60||RT+5 ... 60 °C|| ||19.5||0 ... 19.5 %|| ||85||90||85 ... 90 %|| ||7|| ||750||770||900||750 x 770 x 900 mm||595||620||635||595 x 620 x 635 mm||155|| || || ||1
Ewald
2170058
Incubators CO2
CO2 incubators
0
10
2
1
Out of Stock