08452 30 40 30
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Calibration Bath
- Circulator - Bath
- Constant Climate Chamber
- Cooling
- Drying Ovens
- Environmental Simulation Chamber
- Fridge Drawer
- Heating
- CO2-Incubator
- Access port with silicone plug for CO2 incubators CB series
- Accessories for CO2 Incubators ICOmed
- Accessories for CO2 Incubators INCOmed
- Accessories for CO2 inkubatoren Heracell™ VIOS
- Accessories for Midi 40 CO2Incubator
- Alternative O2 control range for CO2 incubators CB / CBF
- Base frames for CO2 incubators CB series
- Cell Locker™ chambers for CO2 inkubator Heracell™ VIOS™ 160i
- CO2 Incubator Midi 40 with small volume
- CO2 incubator, BBD 6220
- CO2 incubator, BBD 6220
- CO2 incubators CB
- CO2 incubators CB-O, with O2 control
- CO2 incubators CB-S Solid.Line
- CO2 incubators CBF-O, with humidity and O2 control
- CO2 incubators CBF-OZ, with cell therapy compartmentalization, humidity and O2 control
- CO2 incubators CBF, with humidity control
- CO2 Incubators CelCulture® with copper interior/air jacket and ULPA filter
- CO2 Incubators CelCulture® with high heat sterilization and ULPA filter
- CO2 Incubators CelCulture® with high heat sterilization, ULPA filter and O2 control
- CO2 Incubators CelCulture® with high heat sterilization, without ULPA filter
- CO2 Incubators CelCulture® with high heat sterilization, without ULPA filter, with O2 control
- CO2 Incubators CelCulture® with stainless steel interior/air jacket and ULPA filter
- CO2 Incubators CelCulture® with stainless steel interior/air jacket, without ULPA filter
- CO2 incubators Heracell™ VIOS 160i, dual chamber, IR-CO2 sensor
- CO2 incubators Heracell™ VIOS 160i, dual chamber, TC-CO2 sensor
- CO2 incubators Heracell™ VIOS 160i, single chamber, IR-CO2 sensor
- CO2 incubators Heracell™ VIOS 160i, single chamber, TC-CO2 sensor
- CO2 Incubators ICOmed
- CO2 Incubators with Chambers Heracell™ 150i/240i
- Copper interior for CO2 incubator CB-S 170
- Divided inner doors for CO2 incubators CB / CBF
- Door hinge on the left for CO2 incubators CB series
- Options for CO2 incubator Heracell™ VIOS
- Quick sample access for CO2 incubators CB / CBF
- Shelves for CO2 incubators CB series
- Stacking adapters for CO2 incubators CB series
- Stacking frames for CO2 incubators CB series
- Cooling Incubator
- Heating Bath
- Heating Mantle
- Hotplate
- Incubator
- Microwave
- Oven, Furnace
- Shaking Incubator
- Shaking Water Bath
- Temperature Controller, Thermostat
- Test Incubator
- Thermoblocks
- Universal Heating And Drying Incubator
- Vacuum Drying Incubator
- Water Bath
- CO2-Incubator
- Heating Mantle
- Highly Dynamic Temperature Control
- Incubators
- Muffle Furnace
- Shaking Water Bath
- Software/Wireless Control/Automation
- Temperature Controller
- Temperature Regulator
- Temperature Test Chamber
- Thermal Fluid
- Water Bath
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical Instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
CO2 Incubators CelCulture® with high heat sterilization, ULPA filter and O2 control
The CelCulture® CO2 incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.
- Fast and uniform temperature and CO2
- Capacitive humidity sensor
- IR CO2-sensor with automatic auto zero
- Quick recovery time for temperature, CO2 and humidity after door opening
- Stainless steel 1.4301 (AISI 304) or copper interior
- Easy to clean due to removable lids and inner door
- Serial RS485 communication port
- Low maintenance
- Stackable
Options on request:
Additional shelves, stacking kits, rollerbase, chart recorder
Incubator with 180 °C high heat sterilization cycle, for efficient contamination protection. Conforms to the international standards for dry heat sterilization.
- Heat-resistant sensors
- IR CO2 sensor
- O2 Sensor
- ULPA filtration system with internal blower
- 2 MB built-in flash memory for data and event logging
CO2 Incubators CelCulture® with high heat sterilization, ULPA filter and O2 control
PART NO.4AJ-4678086
73130||18593||75798||75716||75521||75477||75903||75907||75906||76033||76078||76129||75706||75674||75589||74423||74415||75501||74437||75791||75780||75700||75444||75681||75669||75770||75463||73569||73548||18919||18875||73812||73810||76298||73401
Type||Nominal capacity l||Min. temperature °C||Max. temperature °C||Temperature||Temp. Stability||Min. CO2 %||Max. CO2 %||CO2 concentration||Min. O2 %||Max. O2 %||O2||Min. relative humidity %||Max. relative humidity %||Relative humidity||With timer||Max. no. of inserts||Material inserts||Material interior||Ext. width mm||Ext. depth mm||Ext. height mm||External dimensions (WxDxH)||Int. width mm||Depth int. mm||Height int. mm||Internal dimensions (WxDxH)||Weight kg||Rated capacity kW||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
CCL-170T-8-HHS||170||+5||60||RT+5 ... 60 °C|| || ||19.5||N/A ... N/A||1.0||18||1 ... 18 %||85||90||85 ... 90 %|| ||7|| ||Stainless steel||660||660||905||660 x 660 x 905 mm||505||535||633||505 x 535 x 633 mm||120||1.30|| ||Mains connection||220 ... 240 VAC, 50/60 Hz|| || ||1
2170297
Incubators CO2
0
10
0
1
Out of Stock
PART NO.4AJ-4678087
73130||18593||75798||75716||75521||75477||75903||75907||75906||76033||76078||76129||75706||75674||75589||74423||74415||75501||74437||75791||75780||75700||75444||75681||75669||75770||75463||73569||73548||18919||18875||73812||73810||76298||73401
Type||Nominal capacity l||Min. temperature °C||Max. temperature °C||Temperature||Temp. Stability||Min. CO2 %||Max. CO2 %||CO2 concentration||Min. O2 %||Max. O2 %||O2||Min. relative humidity %||Max. relative humidity %||Relative humidity||With timer||Max. no. of inserts||Material inserts||Material interior||Ext. width mm||Ext. depth mm||Ext. height mm||External dimensions (WxDxH)||Int. width mm||Depth int. mm||Height int. mm||Internal dimensions (WxDxH)||Weight kg||Rated capacity kW||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
CCL-240T-8-HHS||240||+5||60||RT+5 ... 60 °C|| || ||19.5||N/A ... N/A||1.0||18||1 ... 18 %||85||90||85 ... 90 %|| ||7|| ||Stainless steel||750||770||905||750 x 770 x 905 mm||595||640||633||595 x 640 x 633 mm||155||1.50|| ||Mains connection||220 ... 240 VAC, 50/60 Hz|| || ||1
2170300
Incubators CO2
0
10
1
1
Out of Stock