08452 30 40 30
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Calibration Bath
- Circulator - Bath
- Constant Climate Chamber
- Cooling
- Drying Ovens
- Environmental Simulation Chamber
- Fluid Connector
- Fridge Drawer
- Heating
- CO2-Incubator
- Cooling Incubator
- Heating Bath
- Heating Mantle
- Hotplate
- Incubator
- Microwave
- Oven, Furnace
- Accessoires for Muffle furnaces, M110-series
- Ashing furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC controller
- Ashing furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC controller
- Ashing furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing/Burn off furnaces LV 3/11 - LVT 15/11
- Chamber furnaces
- Charging rack for ashing furnaces
- Collecting Pans for Muffle and Ashing Furnaces
- Double spatulas, nylon
- Exhaust Systems for Muffle Furnaces
- High-temperature chamber furnaces with air circulation NA / NAT
- High-temperature chamber furnaces with SiC rod heating LHTC/LHTCT 03/14 - 08/16 series
- High-temperature Tube Furnaces RHTH/RHTV series
- Muffle furnaces series L, max. 1100 °C, with flap door
- Muffle furnaces series L, max. 1100 °C, with flap door, with thermoelement Z1
- Muffle furnaces series L, max. 1200 °C, with flap door
- Muffle furnaces series L, max. 1400 °C, with flap door
- Muffle Furnaces Series LE 1/11 - LE 24/11 up to 1100 °C
- Muffle furnaces series LT, max. 1100 °C, with lift door
- Muffle furnaces series LT, max. 1100 °C, with lift door, with integrated process documentation
- Muffle furnaces series LT, max. 1100 °C, with lift door, with overtemperature limit control
- Muffle furnaces series LT, max. 1200 °C, with lift door
- Muffle furnaces series LT, max. 1400 °C, with lift door
- Muffle furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC controller
- Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces Thermolyne™
- Rapid incinerator
- Ribbed plates for muffle and ashing furnaces, ceramic
- Tube Furnaces
- Tube Furnaces with Stand
- Shaking Incubator
- Shaking Water Bath
- Temperature Controller, Thermostat
- Test Incubator
- Thermoblocks
- Universal Heating And Drying Incubator
- Vacuum Drying Incubator
- Water Bath
- Heating Mantle
- Highly Dynamic Temperature Control
- Incubators
- Muffle Furnace
- Shaking Water Bath
- Software/Wireless Control/Automation
- Temperature Controller
- Temperature Regulator
- Temperature Test Chamber
- Thermal Fluid
- Water Bath
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical Instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
Muffle furnaces series L, max. 1200 °C, with flap door
For daily laboratory use. Models with flap door or lift door available, for temperatures from 1100 °C to 1400 °C. Equipped with programmable controllers B 510 (with touch panel, 5 programmes with 4 segments each), or C 550 (with touch panel, 10 programmes with 20 segments each), L 1/12 with controller R 7 (continuous operation).
- Dual shell housing made of textured stainless steel sheets for low external temperatures and high stability
- Adjustable air inlet integrated in door
- Exhaust air outlet in rear wall of furnace
- Solid state relays provide low-noise operation
- Standard connector 230 V 1/N/PE 50/60 Hz
- 24 and 40 l with 400 V 3/N/PE 50/60 Hz
Optional:
- Chimney, chimney with fan or catalytic converter
- Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
- Protective gas connection to purge with non-flammable protective or reaction gases (not available in combination with chimney, chimney with fan or catalytic converter)
- Manual or automatic gas supply system
- Process control and documentation via VCD software package for monitoring, documentation and control
-Ceramic heating plates with integrated heating wire, splash and exhaust protected, easy to replace
- Heating from two sides (three sides for interior volumes of 24 and 40 l)
- Flap door can be used as work platform
Alternatives
- Muffle furnaces series L, max. 1400 °C, with flap door
- Muffle furnaces series LT, max. 1400 °C, with lift door
Muffle furnaces series LT, max. 1200 °C, with lift door- Muffle furnaces series LT, max. 1100 °C, with lift door, with integrated process documentation
- Muffle furnaces series LT, max. 1100 °C, with lift door, with overtemperature limit control
- Muffle furnaces series L, max. 1100 °C, with flap door, with thermoelement Z1
- Muffle furnaces series LT, max. 1100 °C, with lift door
- Muffle furnaces series L, max. 1100 °C, with flap door
Muffle furnaces series L, max. 1200 °C, with flap door
PART NO.4AJ-7647819
79556||79101||79279||79207||79986||81974||79181||81201||81449||81311||78960||79404||79162||81746||81339||81597||81112||79370||81657
Power supply||Nominal capacity l||Depth stage mm||Flash point||Min. int. temperature||Weight kg||Min. funnel Ø||mV range accuracy||Rated capacity W||Material stopcock||Min. filter Ø||IP code||Int. width mm||For tubes ml||Height int. mm||Ext. width mm||Min. permitted ambient temperature °C||Ext. height mm||PK
L 15/12/C550||15.0||1200||Flap door|| ||40||230 x 340 x 170 mm||415 x 555 x 515 mm||3200||EU|| || ||230||340||170||415||555||515||1
Nabertherm
L-155K2ANO
L1512C450
Incinerators
Furnaces muffle
0
1
8
1
Out of Stock
PART NO.4AJ-6300117
79556||79101||79279||79207||79986||81974||79181||81201||81449||81311||78960||79404||79162||81746||81339||81597||81112||79370||81657
Power supply||Nominal capacity l||Depth stage mm||Flash point||Min. int. temperature||Weight kg||Min. funnel Ø||mV range accuracy||Rated capacity W||Material stopcock||Min. filter Ø||IP code||Int. width mm||For tubes ml||Height int. mm||Ext. width mm||Min. permitted ambient temperature °C||Ext. height mm||PK
L 5/12/C550||5.0||1200||Flap door|| ||30||200 x 170 x 130 mm||385 x 390 x 460 mm||2400||EU|| || ||200||170||130||385||390||460||1
Nabertherm
L-055K2ANO
L512C450
NABEL-050K2SN
Incinerators
Furnaces muffle
0
3
4
1
Out of Stock
PART NO.4AJ-6265211
79556||79101||79279||79207||79986||81974||79181||81201||81449||81311||78960||79404||79162||81746||81339||81597||81112||79370||81657
Power supply||Nominal capacity l||Depth stage mm||Flash point||Min. int. temperature||Weight kg||Min. funnel Ø||mV range accuracy||Rated capacity W||Material stopcock||Min. filter Ø||IP code||Int. width mm||For tubes ml||Height int. mm||Ext. width mm||Min. permitted ambient temperature °C||Ext. height mm||PK
L 24/12/B510||24.0||1200||Flap door|| ||55||280 x 340 x 250 mm||490 x 555 x 580 mm||4500||CEE|| || ||280||340||250||490||555||580||1
Nabertherm
L-245K2DL
Incinerators
Furnaces muffle
0
4
9
1
Out of Stock
PART NO.4AJ-6238059
79556||79101||79279||79207||79986||81974||79181||81201||81449||81311||78960||79404||79162||81746||81339||81597||81112||79370||81657
Power supply||Nominal capacity l||Depth stage mm||Flash point||Min. int. temperature||Weight kg||Min. funnel Ø||mV range accuracy||Rated capacity W||Material stopcock||Min. filter Ø||IP code||Int. width mm||For tubes ml||Height int. mm||Ext. width mm||Min. permitted ambient temperature °C||Ext. height mm||PK
L 40/12/C550||40.0||1200||Flap door|| ||65||320 x 490 x 250 mm||530 x 705 x 580 mm||6000||CEE|| || ||320||490||250||530||705||580||1
Nabertherm
L-405K2ANO
Incinerators
Furnaces muffle
0
4
12
1
Out of Stock
PART NO.4AJ-6234225
79556||79101||79279||79207||79986||81974||79181||81201||81449||81311||78960||79404||79162||81746||81339||81597||81112||79370||81657
Power supply||Nominal capacity l||Depth stage mm||Flash point||Min. int. temperature||Weight kg||Min. funnel Ø||mV range accuracy||Rated capacity W||Material stopcock||Min. filter Ø||IP code||Int. width mm||For tubes ml||Height int. mm||Ext. width mm||Min. permitted ambient temperature °C||Ext. height mm||PK
L 40/12/B510||40.0||1200||Flap door|| ||65||320 x 490 x 250 mm||530 x 705 x 580 mm||6000||CEE|| || ||320||490||250||530||705||580||1
Nabertherm
L-405K2ANL
Incinerators
Furnaces muffle
0
4
11
1
Out of Stock
PART NO.4AJ-6233463
79556||79101||79279||79207||79986||81974||79181||81201||81449||81311||78960||79404||79162||81746||81339||81597||81112||79370||81657
Power supply||Nominal capacity l||Depth stage mm||Flash point||Min. int. temperature||Weight kg||Min. funnel Ø||mV range accuracy||Rated capacity W||Material stopcock||Min. filter Ø||IP code||Int. width mm||For tubes ml||Height int. mm||Ext. width mm||Min. permitted ambient temperature °C||Ext. height mm||PK
L 15/12/B510||15.0||1200||Flap door|| ||40||230 x 340 x 170 mm||415 x 555 x 515 mm||3200||EU|| || ||230||340||170||415||555||515||1
Nabertherm
L-155K2ANL
Incinerators
Furnaces muffle
0
4
7
1
Out of Stock
PART NO.4AJ-6232727
79556||79101||79279||79207||79986||81974||79181||81201||81449||81311||78960||79404||79162||81746||81339||81597||81112||79370||81657
Power supply||Nominal capacity l||Depth stage mm||Flash point||Min. int. temperature||Weight kg||Min. funnel Ø||mV range accuracy||Rated capacity W||Material stopcock||Min. filter Ø||IP code||Int. width mm||For tubes ml||Height int. mm||Ext. width mm||Min. permitted ambient temperature °C||Ext. height mm||PK
L 9/12/C550||9.0||1200||Flap door|| ||35||230 x 240 x 170 mm||415 x 455 x 515 mm||3000||EU|| || ||230||240||170||415||455||515||1
Nabertherm
L-095K2ANO
Incinerators
Furnaces muffle
0
2
6
1
Out of Stock
PART NO.4AJ-6226450
79556||79101||79279||79207||79986||81974||79181||81201||81449||81311||78960||79404||79162||81746||81339||81597||81112||79370||81657
Power supply||Nominal capacity l||Depth stage mm||Flash point||Min. int. temperature||Weight kg||Min. funnel Ø||mV range accuracy||Rated capacity W||Material stopcock||Min. filter Ø||IP code||Int. width mm||For tubes ml||Height int. mm||Ext. width mm||Min. permitted ambient temperature °C||Ext. height mm||PK
L 9/12/B510||9.0||1200||Flap door|| ||35||230 x 240 x 170 mm||415 x 455 x 515 mm||3000||EU|| || ||230||240||170||415||455||515||1
Nabertherm
L-095K2ANL
Incinerators
Furnaces muffle
0
3
5
1
Out of Stock
PART NO.4AJ-6223409
79556||79101||79279||79207||79986||81974||79181||81201||81449||81311||78960||79404||79162||81746||81339||81597||81112||79370||81657
Power supply||Nominal capacity l||Depth stage mm||Flash point||Min. int. temperature||Weight kg||Min. funnel Ø||mV range accuracy||Rated capacity W||Material stopcock||Min. filter Ø||IP code||Int. width mm||For tubes ml||Height int. mm||Ext. width mm||Min. permitted ambient temperature °C||Ext. height mm||PK
L 5/12/B510||5.0||1200||Flap door|| ||30||200 x 170 x 130 mm||385 x 390 x 460 mm||2400||EU|| || ||200||170||130||385||390||460||1
Nabertherm
L-055K2AL
L512B410
NABEL-050K2CN
Incinerators
Furnaces muffle
0
3
3
0
Out of Stock
PART NO.4AJ-6223309
79556||79101||79279||79207||79986||81974||79181||81201||81449||81311||78960||79404||79162||81746||81339||81597||81112||79370||81657
Power supply||Nominal capacity l||Depth stage mm||Flash point||Min. int. temperature||Weight kg||Min. funnel Ø||mV range accuracy||Rated capacity W||Material stopcock||Min. filter Ø||IP code||Int. width mm||For tubes ml||Height int. mm||Ext. width mm||Min. permitted ambient temperature °C||Ext. height mm||PK
L 3/12/C550||3.0||1200||Flap door|| ||20||160 x 140 x 100 mm||385 x 330 x 405 mm||1200||EU|| || ||160||140||100||385||330||405||1
Nabertherm
L-035K2ANO
Incinerators
Furnaces muffle
0
4
2
1
Out of Stock
PART NO.4AJ-6201618
79556||79101||79279||79207||79986||81974||79181||81201||81449||81311||78960||79404||79162||81746||81339||81597||81112||79370||81657
Power supply||Nominal capacity l||Depth stage mm||Flash point||Min. int. temperature||Weight kg||Min. funnel Ø||mV range accuracy||Rated capacity W||Material stopcock||Min. filter Ø||IP code||Int. width mm||For tubes ml||Height int. mm||Ext. width mm||Min. permitted ambient temperature °C||Ext. height mm||PK
L 3/12/B510||3.0||1200||Flap door|| ||20||160 x 140 x 100 mm||385 x 330 x 405 mm||1200||EU|| || ||160||140||100||385||330||405||1
Nabertherm
L-035K2ANL
L312B410
NABEL-030K2CN
Incinerators
Furnaces muffle
0
4
1
0
Out of Stock
PART NO.4AJ-4675300
79556||79101||79279||79207||79986||81974||79181||81201||81449||81311||78960||79404||79162||81746||81339||81597||81112||79370||81657
Power supply||Nominal capacity l||Depth stage mm||Flash point||Min. int. temperature||Weight kg||Min. funnel Ø||mV range accuracy||Rated capacity W||Material stopcock||Min. filter Ø||IP code||Int. width mm||For tubes ml||Height int. mm||Ext. width mm||Min. permitted ambient temperature °C||Ext. height mm||PK
L 1/12/R7||1.0||1200||Flap door|| ||10||90 x 115 x 110 mm||290 x 280 x 430 mm||1500||EU|| || ||90||115||110||290||280||430||1
Nabertherm
L-014K271
Incinerators
Furnaces muffle
0
3
0
1
Out of Stock
PART NO.4AJ-7981323
79556||79101||79279||79207||79986||81974||79181||81201||81449||81311||78960||79404||79162||81746||81339||81597||81112||79370||81657
Power supply||Nominal capacity l||Depth stage mm||Flash point||Min. int. temperature||Weight kg||Min. funnel Ø||mV range accuracy||Rated capacity W||Material stopcock||Min. filter Ø||IP code||Int. width mm||For tubes ml||Height int. mm||Ext. width mm||Min. permitted ambient temperature °C||Ext. height mm||PK
L 24/12/C550||24.0||1200||Flap door|| ||55||280 x 340 x 250 mm||490 x 555 x 580 mm||4500||CEE|| || ||280||340||250||490||555||580||1
Nabertherm
L-245K2ANO
Incinerators
Furnaces muffle
0
4
10
1
Out of Stock