08452 30 40 30
YSI EXO pH Sensor Replacement Module Guarded 577603-01
EXO pH Sensor Replacement Module, Guarded. A user-replaceable tip for EXOISE01 or EXOISE02 not for use in EXO2 systems with a central wiper.
Also, EXO sensors and modules are not backwards compatible with 6-Series sondes.
Exhaustible reagents are stored in this replaceable module and can be swapped out as needed.
Main Features:
- Electronics & data are stored separately in the smart sensor base
- Long-term costs savings: no need to buy the entire sensor once reagents are depleted (approximately 12-18 months for pH, depending on use).
<p><strong>Depth / Pressure Rating / Limit:</strong> 250m (820ft)<br /> <strong>Desktop Software Compatible:</strong> KOR for EXO<br /> <strong>Digital / Digital Sensors:</strong> Yes<br /> <strong>Equipment used with:</strong> 599701<br /> <strong>Measurement Range:</strong> 0 to 14 units<br /> <strong>Precision:</strong> ±0.1 pH units within ±10°C of calibration temp; ±0.2 pH units for entire temp range (Within the environmental pH range of pH 4 to pH 10)<br /> <strong>Resolution:</strong> 0.01 units<br /> <strong>Response Time:</strong> T63<3 sec (On transfer from water-saturated air to rapidly stirred air-saturated water at a specific conductance of 800 µS/cm at 20°C; T63<5 seconds on transfer from water-saturated air to slowly-stirred air-saturated water.)<br /> <strong>Sampling:</strong> Yes<br /> <strong>Smart Sensors / Ports:</strong> Yes<br /> <strong>User Calibratable:</strong> Yes<br /> <strong>User Replaceable:</strong> Yes<br /> <strong>Warranty:</strong> 1 Year - Replaceable reagent modules for pH<br /> <strong>Waterproof:</strong> Yes, when installed</p> | |
| Manufacturer P/n | 577603-01 |