Brookfield Ametek Thermosel 230VAC DP with Access New Plug HT-220A DP

For Elevated Temperature Testing
The difficulty with viscosity measurements of hot melts and liquids at elevated temperatures has been in maintaining accurate temperature control that is consistent from sample to sample so that meaningful data could be obtained. The Brookfield Ametek Thermosel solves this problem by providing a stable, precisely controlled sample environment. The Thermosel System produces viscosity measurements that are not only accurate but entirely reproducible.

Several factors contribute to the stable environment:

• Non-fluctuating temperature control
• Small sample volume and insulated sample chamber which reduces temperature gradients within the sample.
• The rotating spindle, which acts as a built-in stirring device.
• The test procedure is quite straightforward. Once familiar with the system, unskilled operators can easily produce accurate, reproducible data.

Main Benefits of the Thermosel System:

• Provides control of sample temperature up to +300°C
• Programmable Controller offers single set point or up to 10 programmable set points. Temperature ramping between set points is possible if used with RheocalcT Software
• Note: Requires optional cable HT-106 when QC control with RheocalcT is implemented.
• Compatible with standard Brookfield Ametek Viscometers and DV3T Rheometers
• Note: requires optional cable DVP-141 when controlled by DV3T Rheometer
• Supplied with reusable stainless steel sample container and five disposable aluminum sample chambers
• Outputs: 0-4 Vdc for chart recorder; RS-232 for use with DV3T and/or RheocalcT