Your basket is empty
Home > Environmental > Data Acquisition > HydroRIG Remote Intelligent Gateway YSI 615531

HydroRIG Remote Intelligent Gateway YSI 615531
Enlarge
X-615531 (2).pngX-615531 (3).png

HydroRIG Remote Intelligent Gateway YSI 615531

PART NO: X-615531
POA - Request a Quote
Out of Stock
  • HydroRIG is an all-in-one IoT gateway that makes environmental monitoring simpler, quicker, and more efficient. Whether installed at a new location or added to an existing site, it links your field instruments to the cloud via HydroSphere, allowing you to receive data from both Xylem and third-party sensors.
  • Acting as a compact, remote smart gateway, HydroRIG streamlines the way you collect and interpret environmental information. It brings together the roles of a data logger and modem with no setup required.
  • Just connect your sensors, switch on the device, and you’re online. Data is sent directly to HydroSphere—YSI’s web-based platform—where you can view trends, access live readings, download data, and manage your site from virtually anywhere.

Physical specification

Housing Dimensions 19.05 x 11.11 x 4.45 cm (7.50 x 4.38 x 1.75 in)
Shipping Weight 0.45 kg (1 lb)
Housing Material Plastic
IP Rating IP 50-rated enclosure
Warranty 24 months

 

Environmental 

Analog input Channel 1 analog input channel for a 4-20 mA device
Accuracy +/- 0.1% FS
Range 0 to 20 mA
Switched +12.0 volt excitation Type Regulated 12 V
Current 1 A max load, protected by electronic fuse.
Digital I/O Channels 2 digital inputs, 1 digital output
Input Levels 0 to 12 V
High=7 to 16 V
Low 0 to 3 V
Output Levels Regulated 12 V, source 1 A max, protected by electronic fuse
Connector 8 pin header
SDI-12 Mode Ver 1.4
Connector 6 pin D connector, male
RS-232*
(optional external modem)		 Type Single RS 232 configured as a DTE device
Connector 9-pin D connector, male
Baud Rate Programmable
RS-485 Type Single RS-485 port
Connector 5-pin D header, male
GNSS Compatible Systems GPS, GLONASS
Connector SMA - female


Communication

USB
 		 Type Micro USB
Version USB version 2.0
Cellular Modem Type CAT-1 or CAT-M1
External Satellite* Type GOES, Iridium


Power 

Requirements Voltage input 9 VDC to 16 input
Connection Connector 2-pin D connector, male

 

Memory

General   Data buffering capacity 32 MB

 

Environmental 

Temperature

 Operating -25 to 60 °C (-13 to 140 °F)
Storage -25 to 60 °C (-13 to 140 °F)