Your basket is empty
Home > Environmental > Water Level monitoring > SDI-12 to 4-20ma Converter Xylem-YSI H-4161

SDI-12 to 4-20ma Converter Xylem-YSI H-4161
Enlarge

SDI-12 to 4-20ma Converter Xylem-YSI H-4161

PART NO: X-H-4161
Price: £497.51
Out of Stock

YSI WaterLOG H-4161 converts SDI-12 measurements to a precision isolated two-wire 4-20 mA output. It can monitor an SDI-12 bus, initiate measurements through an auxiliary SDI-12 port, or operate transparently.

Configured product: SDI-12 TO 4-20MA CONVERTER.


4-20 mA - Type: 2-wire, loop-powered
4-20 mA - Isolation: 1000 V RMS minimum
4-20 mA - Loop Voltage: 5.5 V min, 35 V max
4-20 mA - Resolution: 16 bits
4-20 mA - Non-linearity: ±0.01% FS max
4-20 mA - Offset Drift: ±25 ppm FS/°C max
4-20 mA - Range: 0.35 to 24 mA
Power - Voltage Input: 9 to 16 VDC
Power - Surge Protection: Built-in, 1.5 KVA
Power - Supply Current: Sleep 2.1 mA typical; active 8.0 mA typical
SDI-12 - Baud Rate: 1200
SDI-12 - Protocol: 7-bit even parity, 1 stop bit
SDI-12 - Output Levels: Min high 3.5 V; max low 0.8 V
Response Time: aM!: 0 seconds, 1 parameter; all other: 1 second, 1 parameter
LCD - Type: 2-line x 16-character reflective
LCD - Operating Temperature: 0 to +50°C
LCD - Storage Temperature: -20 to +60°C
Operating Modes: Monitor, Initiate, Transparent
Environmental - Operating Temperature: -20 to +50°C
Environmental - Storage Temperature: -20 to +60°C
Environmental - Humidity: Non-condensing
Mechanical - Material: ABS plastic
Mechanical - Size: 3.75 in L x 2.65 in W x 1.25 in D
Connection - +12V/SDI-12/AuxSDI: 5-position plug-in Phoenix Combicon terminal strip
Connection - 4-20 mA: 2-position plug-in Phoenix Combicon terminal strip
Warranty: 1 year