Compact Ultrasonic Processor UP100H Hielscher Ultrasonics UP100H

Ultrasonic Processor UP100H
For manual operation or for stand use, frequency 30kHz, automatic frequency tuning system, amplitude adjustable 20% to 100%, pulse 0 to 100%, dry running protected, in portable case, with mounting for stand STH-16 and mounting tools, 230V a.c.

Product Specification:
Product Type: UP100H
Max. sample volume: 500ml

The ultrasonic processor UP100H (100 watts, 30kHz) has the same compact and ergonomic design as the UP50H homogenizer (50 watts, 30kHz) but it comes with twice the ultrasonic power. At 1.1kg, it is lightweight to hold. Of course, an operation at a stand is possible, too. The ultrasonic generator and the transducer are combined in one unit, so that there are no hassles with connecting cables. One power supply cable. That’s all. This device is most suitable for the ultrasonication of very small as well as medium-sized samples. With the use of the 10mm sonotrode MS10 (sold separately), the range of application expands to the sonication of volumes of up to 500ml. Therefore, this ultrasonic device is mainly used for the preparation of samples in the lab, such as: 

• Emulsifying (mixing of immiscible liquids) 
• Dispersing (mixing of powders into liquids) 
• Homogenizing 
• Cell disruption, lysis and extraction 
• Deagglomeration of nanomaterials 
• Degassing

In combination with the flow cell D7K, you can sonicate material in a continuous flow, e.g. at 10 to 100mL/min. By this, you can simulate continuous sonication processes in the smallest scale. As the UP100H can be operated 24 hours per day (24h/7d), this setup could process up to 140L per day (depending on the application).

Ultrasonic processor