08452 30 40 30
WTW TriOxmatic 690-7 201690
PART NO: X-201690
Price: £1,195.20
Out of Stock (Ships in approx. 2 weeks)
Potentiostatic D.O. sensor with integrated temperature sensor
Design according to the minimum requirements for measuring instruments used at waste water treatment plants defined by ATV (waste water association) in bulletin M256
Potentiostatic D.O. sensor (3-electrode principle)
- To be connected to the EcoLine® or QuadroLine® series measuring transmitters
* With integrated temperature sensor and built-in preamplifier for low impedance, interference-free signal transmission
Equipped with the following features:
- Integrated lightning protection
- Zero current free electrode system
- Exchangeable membrane head with robust 50um special membrane
- Lowest incident flow required
- Double thermistor system for temperature compensation
- OxiCal air calibration without accessories
Measuring range (25°C):
- 0 ... 60 mg O2/l
- 0 ... 600 % saturation
Response time (t90):
- 180 seconds
Sensor length:
- 196mm
Connection cable:
- 7m long, with watertight plug (IP65)
Type of protection:
- IP 68 (sensor)
Design according to the minimum requirements for measuring instruments used at waste water treatment plants defined by ATV (waste water association) in bulletin M256
Potentiostatic D.O. sensor (3-electrode principle)
- To be connected to the EcoLine® or QuadroLine® series measuring transmitters
* With integrated temperature sensor and built-in preamplifier for low impedance, interference-free signal transmission
Equipped with the following features:
- Integrated lightning protection
- Zero current free electrode system
- Exchangeable membrane head with robust 50um special membrane
- Lowest incident flow required
- Double thermistor system for temperature compensation
- OxiCal air calibration without accessories
Measuring range (25°C):
- 0 ... 60 mg O2/l
- 0 ... 600 % saturation
Response time (t90):
- 180 seconds
Sensor length:
- 196mm
Connection cable:
- 7m long, with watertight plug (IP65)
Type of protection:
- IP 68 (sensor)
| Analog electro-chemical D.O. sensors TriOxmatic® D.O. sensors with continuous measuring accuracy. Selction of models with an automatic self diagnosis system, a shorter response time and different cable lengths. All models are supplied with accessories box and can be connected to the monitor Oxi 298 (exception: TriOxmatic® 700). TriOxmatic® 700: For biological cleaning steps (wastewater treatment plants). With automatic self diagnosis SensReg (electrolyte consumption) and SensLeck (membrane monitoring). Medium response time of t90 < 180 s. Only available as retrofit fitting for analog converters of the Ecoline® and QuadroLine® series. Digital version still available (IQ Sensor Net System 181). TriOxmatic® 690: For measuring tasks in wastewater/water. Economic model without self diagnosis. TriOxmatic® 701: With increased resolution for the measurement of residual oxygen in the denitrification. Based on the increased resolution, a shorter response time (t90 < 30 s) and the thinner special membrane, this sensor can be used for quicker response processes with lower O2 concentrations. Scope of supply: Sensor incl. accessories box with membrane heads, electrolyte solution, cleaning solution and cathode cleaner Product Specification: TriOxmatic® 600/700 // TriOxmatic® 701 Temperature range: -5 ... 50 °C DO concentration: 0.0 ... 60.0 mg/l // 0.00 ... 20.00 mg/l DO saturation: 0 ... 600 % // 0.0 ... 60.0 mg/l / 0.0 ... 200.0 % / 0 ... 600 % Pressure resistance: 10 bar Type: TriOxmatic® 690-7 Cable: 7 m | |
| Catalogue Number | 7.089 416 |
| Manufacturer | WTW |
| Manufacturer P/n | 201690 |
| Cable m | 7 |
| Type | TriOxmatic® 690-7 |
| PK | 1 |
| Search words | Oxygen sensors |