Analogue Shore-Hardness Durometer Kern HB0 100-00

• Measurement of penetration depth (Shore)
• Material thickness of the sample, min. 6 mm
• Particularly recommended for internal comparison measurement. Standard calibrations e.g. to DIN 48-4 are not possible because of very narrow standard tolerances
• Can be attached to the test stands TI-AC (for Shore A and Shore A0) and TI-D (for Shore D)
• Max mode: Holds the maximum value in the display
• Point mode: Shows one instant value
• Screws to screw on to the TI: M7 fine thread
• Delivered in a plastic carrying case

Tolerance: 3 %
Display: Analogue
Material housing: Metal
Dimensions (WxDxH): 60 x 25 x 115 mm
Weight: 160 g