08452 30 40 30
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Calibration Bath
- Circulator - Bath
- Constant Climate Chamber
- Cooling
- Drying Ovens
- Environmental Simulation Chamber
- Fridge Drawer
- Heating
- CO2-Incubator
- Access port with silicone plug for CO2 incubators CB series
- Accessories for CO2 Incubators ICOmed
- Accessories for CO2 Incubators INCOmed
- Accessories for CO2 inkubatoren Heracell™ VIOS
- Accessories for Midi 40 CO2Incubator
- Alternative O2 control range for CO2 incubators CB / CBF
- Base frames for CO2 incubators CB series
- Cell Locker™ chambers for CO2 inkubator Heracell™ VIOS™ 160i
- CO2 Incubator Midi 40 with small volume
- CO2 incubator, BBD 6220
- CO2 incubator, BBD 6220
- CO2 incubators CB
- CO2 incubators CB-O, with O2 control
- CO2 incubators CB-S Solid.Line
- CO2 incubators CBF-O, with humidity and O2 control
- CO2 incubators CBF-OZ, with cell therapy compartmentalization, humidity and O2 control
- CO2 incubators CBF, with humidity control
- CO2 Incubators CelCulture® with copper interior/air jacket and ULPA filter
- CO2 Incubators CelCulture® with high heat sterilization and ULPA filter
- CO2 Incubators CelCulture® with high heat sterilization, ULPA filter and O2 control
- CO2 Incubators CelCulture® with high heat sterilization, without ULPA filter
- CO2 Incubators CelCulture® with high heat sterilization, without ULPA filter, with O2 control
- CO2 Incubators CelCulture® with stainless steel interior/air jacket and ULPA filter
- CO2 Incubators CelCulture® with stainless steel interior/air jacket, without ULPA filter
- CO2 incubators Heracell™ VIOS 160i, dual chamber, IR-CO2 sensor
- CO2 incubators Heracell™ VIOS 160i, dual chamber, TC-CO2 sensor
- CO2 incubators Heracell™ VIOS 160i, single chamber, IR-CO2 sensor
- CO2 incubators Heracell™ VIOS 160i, single chamber, TC-CO2 sensor
- CO2 Incubators ICOmed
- CO2 Incubators with Chambers Heracell™ 150i/240i
- Copper interior for CO2 incubator CB-S 170
- Divided inner doors for CO2 incubators CB / CBF
- Door hinge on the left for CO2 incubators CB series
- Options for CO2 incubator Heracell™ VIOS
- Quick sample access for CO2 incubators CB / CBF
- Shelves for CO2 incubators CB series
- Stacking adapters for CO2 incubators CB series
- Stacking frames for CO2 incubators CB series
- Cooling Incubator
- Heating Bath
- Heating Mantle
- Hotplate
- Incubator
- Microwave
- Oven, Furnace
- Shaking Incubator
- Shaking Water Bath
- Temperature Controller, Thermostat
- Test Incubator
- Thermoblocks
- Universal Heating And Drying Incubator
- Vacuum Drying Incubator
- Water Bath
- CO2-Incubator
- Heating Mantle
- Highly Dynamic Temperature Control
- Incubators
- Muffle Furnace
- Shaking Water Bath
- Software/Wireless Control/Automation
- Temperature Controller
- Temperature Regulator
- Temperature Test Chamber
- Thermal Fluid
- Water Bath
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical Instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
CO2 incubators CB-S Solid.Line
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.
- Anti-contamination concept with 180 °C hot air sterilization
- CO2 sensor with single-beam infrared technology
- Seamless inner chamber made of stainless steel
- Fanless interior with Venturi CO2 gas mixing nozzle
- Internal data logger, measured values can be read out via USB
- Troubleshooting system with visual and acoustic alarms
- Interfaces: Ethernet, USB, zero-voltage alarm contact
-Humidification system with condensation protection
- PID controller with LCD display
CO2 incubators CB-S Solid.Line
PART NO.4AJ-4684776
73130||18593||75798||75716||75521||73520||75903||75907||75906||76117||76146||76129||75706||75674||75589||74423||74415||75501||74437||75791||75780||75700||75444||75681||75669||75770||75463||73569||73548||18919||18875||73812||73810||76298||73401
Type||Nominal capacity l||Min. temperature °C||Max. temperature °C||Temperature||Temp. Stability K||Min. CO2 %||Max. CO2 %||CO2 concentration||Min. O2||Max. O2||O2||Min. relative humidity %||Max. relative humidity %||Relative humidity||With timer||Max. no. of inserts||Material inserts||Material interior||Ext. width mm||Ext. depth mm||Ext. height mm||External dimensions (WxDxH)||Int. width mm||Depth int. mm||Height int. mm||Internal dimensions (WxDxH)||Weight kg||Rated capacity kW||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
CB-S 170||170||+6||50||RT+6 ... 50 °C||±0,1|| ||20.0||N/A ... N/A|| || || ||90||95||90 ... 95 %|| ||6|| ||Stainless steel||680||715||870||680 x 715 x 870 mm||560||505||600||560 x 505 x 600 mm||96||1.30||EU||Mains connection||200 ... 230 V, 50/60 Hz|| || ||1
BINDER
9640-0001
CBS170
Incubator(s) CO2
0
1
0
1
Out of Stock
PART NO.4AJ-4684777
73130||18593||75798||75716||75521||73520||75903||75907||75906||76117||76146||76129||75706||75674||75589||74423||74415||75501||74437||75791||75780||75700||75444||75681||75669||75770||75463||73569||73548||18919||18875||73812||73810||76298||73401
Type||Nominal capacity l||Min. temperature °C||Max. temperature °C||Temperature||Temp. Stability K||Min. CO2 %||Max. CO2 %||CO2 concentration||Min. O2||Max. O2||O2||Min. relative humidity %||Max. relative humidity %||Relative humidity||With timer||Max. no. of inserts||Material inserts||Material interior||Ext. width mm||Ext. depth mm||Ext. height mm||External dimensions (WxDxH)||Int. width mm||Depth int. mm||Height int. mm||Internal dimensions (WxDxH)||Weight kg||Rated capacity kW||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
CB-S 260||267||+6||50||RT+6 ... 50 °C||±0,1|| ||20.0||N/A ... N/A|| || || ||90||95||90 ... 95 %|| ||8|| ||Stainless steel||740||785||1020||740 x 785 x 1020 mm||620||575||750||620 x 575 x 750 mm||122||1.50||EU||Mains connection||200 ... 230 V, 50/60 Hz|| || ||1
BINDER
9640-0003
CBS260
Incubator(s) CO2
0
5
1
1
Out of Stock
Accessories:
- Shelves for CO2 incubators CB series
- Stacking adapters for CO2 incubators CB series
- Stacking frames for CO2 incubators CB series
- Base frames for CO2 incubators CB series
- Copper interior for CO2 incubator CB-S 170
- Door hinge on the left for CO2 incubators CB series
- Access port with silicone plug for CO2 incubators CB series