08452 30 40 30
- Chromatography
- Environmental
- Aquaculture
- BOD Respirometry
- Carbon COD-TOC-DOC-SAC-BOD
- Conductivity
- Data Acquisition
- Dissolved Oxygen
- E-coli Online Monitoring
- Electrode Care and Maintenance
- Ionselective
- Multi-Parameter
- Nutrient Monitoring
- ORP-Redox
- pH
- Photometry
- Sample Analysis
- BOD
- COD
- Accessories for determining the COD
- behr COD Heating Blocks
- behrotest ® HTI 1 manual titration station
- COD cooling trough
- COD magnetic stirrer
- COD magnetic stirrer
- COD measuring station MD 200
- COD metering funnel
- COD Reagent
- COD sample digestion units PA-CSB
- COD Standard
- COD workstations, PB-CSB/M
- COD-Standard Cuvette Test, 16 mm
- HCl-absorber
- Thermoreactor CR 2200
- Thermoreactor RD 125
- Thermostat LT200
- TRS 300 programmable temperature and time control unit
- Workstations for SMA ARB
- Elemental Analysis
- Extraction
- Kjeldahl
- Milk Analysis
- Oil Testing
- Photometer
- Special Distillation
- Turbidity
- Sample Preparation
- Sondes
- Trace Analysis
- Turbidity Measurement
- UV Transmittance Monitors
- Water Flow Sensors
- Water Purification
- Water Samplers
- Laboratory
- Life Science
- promotions
- Ultra Violet Sanitisation
Workstations for SMA ARB
Workstation model SMA-ARB
The behrotest® workstation model SMA-ARB is a basic system for simultaneous aqua regia digestion of either 6 or 12 samples for heavy metals analysis.
System components:
- Precision 6 or 12 sample SMA heating block for round-bottom sample vessels of Ø 41.8 mm, temperature range 20 to 300 °C.
- External ET 2 controller, operating range 20 to 399°C. Time settings from 10 to 120 min. and continuous operation.
- 6 or 12 SR 2 250 ml round-bottom sample vessels with standard taper mouth and PVDF collar.
- 6 or 12 RFK 1 Allihn reflux condensers.
- 6 or 12 AS 1 absorption vessels.
- SG/B stainless steel vessel holding frame for 6 or 12 sample vessels.
- Support scaffold with cooling water distributor and storage holder for 6 or 12 condensers.
Workstation model SMA-ARM
The behrotest® SMA-ARM workstations are provided with a programmable microprocessor-controlled time/temp. controller as well as a fume manifold for drawing off the acid vapors. This results in greater convenience and functionality in routine laboratory operations.
